In modern canteen management, canteen dishwashers have become an important equipment to improve tableware washing efficiency and hygiene standards. However, the installation of a dishwasher is not a simple matter, and many factors need to be considered to ensure its normal operation and extend its service life. The following is a detailed introduction to the installation requirements of canteen dishwashers.

1. Installation location

The canteen dishwasher should be installed on a flat, non-sloped surface to ensure that it will not move due to uneven ground during operation. Generally speaking, the ground height deviation of the dishwasher installation location should be less than 2 cm. At the same time, the dishwasher should be installed near the water source and power supply to facilitate access to the water source and drainage pipes and provide a stable power supply. When choosing a location, you should also ensure that there is enough space to accommodate the dishwasher and it is convenient to use.

Key point: When facing the dishwasher, which side is more convenient to put the dishes in? Is it on the left and out on the right, or on the right and out on the left? This is something you need to confirm when buying a dishwasher.

two,Power Requirements

The canteen dishwasher is generally a high-power device, with a 380V power of more than tens of kW, and usually requires a dedicated power supply. The power socket should be installed in a dry place.A separate electrical box should be used.And use a leakage switch to ensure electricity safety.

3. Water source and drainage requirements

The dishwasher needs to be connected to the tap water and drainage system. The water inlet is directly connected to the municipal tap water pipe, which has a lot of scale. It is recommended to install a water softener before the water inlet, which can reduce the water marks on the dishes caused by scale problems and increase the life of the equipment. The drainage can be connected to the kitchen drainage system, and a floor trough can generally be opened;

4. Smoke exhaust ventilation system

When the dishwasher is in operation, a lot of water vapor will be generated. If the dishwashing room is relatively sealed, a fume hood and ventilation system should be installed. Chi Neng Dishwasher now has a fume hood-free dishwasher. For details, please consult customer service.

5. Maintenance of dishwasher

The dishwasher needs regular maintenance and care during use to ensure its normal operation and extend its service life. If a water softener is not installed, the scale should be checked regularly and descaling should be performed once every three months. You can consult customer service to purchase descaling agents. Regularly check whether the dishwasher nozzle is blocked by foreign objects. You can remove it and dredge it with wire.

In summary, the installation requirements of canteen dishwashers involve many aspects, including installation location selection, power supply and socket requirements, water source and drainage requirements, smoke exhaust ventilation requirements, installation details and precautions, etc. During the installation process, these requirements should be strictly followed and safety regulations should be paid attention to. Through reasonable installation and regular maintenance, the dishwasher will be able to bring a more efficient and hygienic tableware washing experience to the canteen.